In this article, you will know about the damage free wall cleaning guide. So, if you are interested in knowing about it, then keep reading this article.
In both a physical and aesthetic sense, walls keep your whole house together! Colors, patterns, and cleanliness of your walls all play an important part in transforming your property into a lovely home. That is why every homeowner should make cleaning and maintaining their walls a priority.
Smudges, grease stains, dust, cobwebs, and finger prints are common on walls. If you have little children running around the home with paint and play dough on their fingers, your walls may have to withstand a lot more. In any case, it is impossible to maintain your walls spotlessly clean permanently; nonetheless, this does not imply you should leave them unclean. Yes, cleaning your own walls might be frightening for fear of ruining them, not to mention daunting due to the large space to clean. However, with a little prior understanding of the task at hand, this step-by-step approach is quite simple to follow.
Damage Free Wall Cleaning Guide Steps
Step 1: Preparation for wall cleaning is now underway.
To preparation for the next wall cleaning, move all furniture to the center of the room so you have enough area to work and the water doesn’t splash where it shouldn’t. Second, lay down some old towels or sheets to absorb any drips. The third and last step in the preparation process is to collect all of the things you will need to clean your walls:
- Broom with a long handle (grass brooms work perfectly)
- Two buckets
- mild detergent or wall cleaning solution
- Using soft sponges (nothing abrasive!)
- squeaky-clean absorbent towels
Step 2: Remove Dust and Cobwebs from the Walls
Remove cobwebs and dust from the corners of the walls using a long-handled broom. Climb the ladder to reach high locations and clean the walls with a brush or a dusting cloth. Simply glide the broom over the remaining wall in a back and forth motion to remove all the dust.
Step 3: Construct Your Cleaning Solution
Mix 1 cup of wall cleaning solution into 1 gallon of water. There are several sorts of wall cleaning solutions available, so ask the shop clerk for one that is appropriate for your paint type (i.e. glossy finish, semi-glossy or flat paint). If your walls are just lightly stained, you may use a moderate cleaning detergent (approximately half a cup in 1 gallon of water). Gently stir the solution until suds develop; this is when the true cleaning can begin. However, it is best to test your cleaning solution on a tiny, concealed section of the wall first to verify that it is not excessively harsh or discoloring the walls. If the solution is too strong, add additional water until the test results are satisfactory.
Step 4: Begin at the Bottom and Work Your Way Up
Starting from the top can allow unclean water to flow down your walls and discolor as it dries. Keep a second pail of clean water and another sponge nearby. Begin by soaking the sponge in the cleaning solution and wringing away any excess soapy water. Wipe the wall lightly from one bottom corner to the other, using as little force as possible. After cleaning each area with soapy water, rinse it with a clean sponge and water (squeeze out excess clean water). As you work your way up, use the clean sponge to wipe any drips that flow down the previously cleaned areas.
Step 5: Finish by Blotting
After cleaning a whole wall from side to side, bottom to top, wipe any spots with extra wetness using a clean towel. If the cloth becomes too moist, pick another dry one and continue cleaning before moving on to the next wall.
Important Wall Cleaning Suggestions:
- If you apply too much power while scrubbing your walls, the paint may come off. Instead of a single vigorous scrub, go over difficult areas many times with moderate pressure.
- Don’t stop washing a wall in the middle; complete the full wall and then take a rest. This is due to the fact that constant dampening and drying of the wall with soapy water might result in a wave-like detergent stain.
- Before you begin washing, make sure your walls are dust-free. Even a little amount of dust in the corners may be spread over the wall, making it more difficult to clean since the wetness causes it to stick to the wall more.
- Try a combination of 1 cup borax, 1 cup white vinegar, and 1 cup clear ammonia combined in 1 gallon of water for more heavily filthy walls.